器件模型
主页

Monolithic Microwave Integrated Circuit, or MMIC (sometimes pronounced "mimic"), is a type of integrated circuit (IC) device that operates at microwave frequencies (300 MHz to 300 GHz). These devices typically perform functions such as microwave mixing, power amplification, low-noise amplification, and high-frequency switching. Inputs and outputs on MMIC devices are frequently matched to a characteristic impedance of 50 ohms. This makes them easier to use, as cascading of MMICs does not then require an external matching network. Additionally, most microwave test equipment is designed to operate in a 50-ohm environment.

MMICs are dimensionally small (from around 1 mm² to 10 mm²) and can be mass-produced, which has allowed the proliferation of high-frequency devices such as cellular phones. MMICs were originally fabricated using gallium arsenide (GaAs), a III-V compound semiconductor. It has two fundamental advantages over silicon (Si), the traditional material for IC realisation: device (transistor) speed and a semi-insulating substrate. Both factors help with the design of high-frequency circuit functions. However, the speed of Si-based technologies has gradually increased as transistor feature sizes have reduced, and MMICs can now also be fabricated in Si technology. The primary advantage of Si technology is its lower fabrication cost compared with GaAs. Silicon wafer diameters are larger (typically 8" or 12" compared with 4" or 6" for GaAs) and the wafer costs are lower, contributing to a less expensive IC.

Originally, MMICs used MEtal-Semiconductor Field-Effect Transistors (MESFETs) as the active device. More recently High Electron Mobility Transistors (HEMTs), Pseudomorphic HEMTs and Heterojunction Bipolar Transistors have become common.

Other III-V technologies, such as indium phosphide (InP), have been shown to offer superior performance to GaAs in terms of gain, higher cutoff frequency, and low noise. However they also tend to be more expensive due to smaller wafer sizes and increased material fragility.

Silicon germanium (SiGe) is a Si-based compound semiconductor technology offering higher-speed transistors than conventional Si devices but with similar cost advantages.

Gallium nitride (GaN) is also an option for MMICs. Because GaN transistors can operate at much higher temperatures and work at much higher voltages than GaAs transistors, they make ideal power amplifiers at microwave frequencies.

波段名称
频率范围
波长范围
波段名称
频率范围
波长范围
P波段230-1000MHz
L波段
1 - 2 GHz
300.00 - 150.00 mm
S波段
2 - 4 GHz
150.00 - 75.00 mm
C波段
4 - 8 GHz
75.00 - 37.50 mm
X波段
8 - 12 GHz
37.50 - 25.00 mm
Ku波段
12 - 18 GHz
25.00 - 16.67 mm
K波段
18 - 27 GHz
16.67 - 11.11 mm
Ka波段
27 - 40 GHz
11.11 - 7.50 mm
Q波段
30 - 50 GHz
10.00 - 6.00 mm
U波段
40 - 60 GHz
7.50 - 5.00 mm
V波段
50 - 75 GHz
6.00 - 4.00 mm
E波段
60 - 90 GHz
5.00 - 3.33 mm
W波段
75 - 110 GHz
4.00 - 2.73 mm
F波段
90 - 140 GHz
3.33 - 2.14 mm
D波段
110 - 170 GHz
2.73 - 1.76 mm


多项目晶圆(Multi Project Wafer,简称MPW),即允许不同的用户将具有相同工艺的集成电路设计在同一晶圆上进行流片。

开放工艺:

l   ED02AH:栅长0.18μm的增强型和耗尽型混合的PHEMT工艺,适用于模拟信号和混合信号集成的MMIC设计。

l   D01PH:栅长0.13μm的耗尽型PHEMT工艺,适用于功放和低噪放MMIC设计。

l   D01MH:栅长0.13μm的耗尽型MHEMT工艺,适用于功放,低噪放和高频MMIC设计。

l   D007IH:栅长0.07μm的耗尽型MHEMT工艺,用于低噪放和超高频率MMIC设计。

l   DH15IB:栅长1.5um的双异质结HBT工艺,用于超高速数字和高频MMIC设计。

United Monolithic Semiconductors designs, produces and markets leading edge RF, microwave and  millimetre wave components and integrated circuits (ICs) for the Telecom, Space, Defence, Automotive and ISM Industries.

The company's strategy is to position itself as a "one-stop" supplier to the wireless microwave and millimetre-wave market, offering a broad range of standard and custom designed MMICs, along with an open foundry service. It has two production facilities, at Ulm in Germany, and Villebon/Yvette in France, where the commercial headquarters and product design and development are also based.



Our products offer leading edge performance and high volume capacity; Most of our technologies are available in open foundry service mode.

The company, supported by a global network of representatives and distributors, is committed to developing partnerships with application and sector specialists who can benefit from advanced III-V technologies.

Over recent years we have gained a growing reputation as a leading supplier of proprietary MMICs for wireless communication applications, such as broadband wireless, VSAT, high data rate communications, Radio Links, Intelligent Traffic Systems, Automotive ACC and short-range sensors, and ISM Wireless.

The standard product ranges include: power amplifiers, low noise amplifiers, mixers, multipliers, dividers, phase-shifters, up & down converters, frequency generation and highly integrated multifunction parts.