Design Kit

The design kits support a Cadence mixed signal platform:

 

  • Design Framework II (Cadence 6.1)
  • Behavioral Modeling (Verilog HDL)
  • Logic Synthesis & Optimization (VHDL / HDL Compiler, Design Compiler / Synopsys, Power Compiler / Synopsys)
  • Test pattern generation / DFT Compiler (Synopsys)
  • Simulation (RF: SpectreRF, Analog: SpectreS, Cadence Incisive / Behavioral, Digital: Mentor Graphics ModelSim)
  • Place & Route (Cadence EDI)
  • Layout (Cadence Virtuoso Editor)
  • Verification (Assura: DRC / LVS / Extract / Parasitic Extraction)
  • ADS-support via Golden Gate/RFIC dynamic link to Cadence is available
  • Standalone ADS Kit including Momentum substrate layer file
  • Sonnet support for all design kits
  • Support of Analog Office and TexEDA via partners is available
  • ECL library for SGB25V
  • Radiation hard CMOS library for SGB25V / SG13S.

Available Analog and Digital Blocks and Designs

To support designs, IHP offers a wide range of blocks and designs for wireless & broadband solutions:

Analog

6 GHz RF Components

6 GHz LNA with 12 dB signal enhancement

RF-VGA with 30 dB signal enhancementVariable phase shifter (0 to 360°)


60 GHz Circuits

Complete 60 GHz transceiver and components in SiGe BiCMOS

60 GHz TX and RX IC with phase shifter

60 GHz beamforming components and integrated frontend

60 GHz channel sounder module

60 GHz planar PCB-integrated antenna


122 GHz Radar & Sensors

122 GHz CW/FMCW Radar IC

D-band on-chip antenna (with Localized Backside Etching)

Integrated 122 GHz receiver with calibration and digital control via SPI


245 GHz

Integrated 245 GHz transmitter and receiver


ADCs, DACs and Logic

18 GS/s 4 bit DAC with 6 GHz bandwidth

10 GS/s 6 bit DAC with offline calibration

Low speed and low power calibration DACs

1 MS/s, 8 – 14 bit resolution

0.2 – 1.5 mW DC power consumption

Frequency divider operating up to 40 GHz

9 GS/s (2.1 - 2.2 GHz) bandpass delta-sigma modulator

Bandpass delta-sigma modulators for class-S amplifiers (450 MHz, 900 MHz, 2 GHz)

 

Frequency Synthesizers

0.6 – 4.4 GHz, 10 – 14 GHz and 20 – 24 GHz fully integrated frequency synthesizer with low phase noise(Integer-N and DS-Fractional-N) 

VCOs and integer-N PLL s for various frequencies from 5 – 120 GHz

Low-noise SiGe LC-VCOs in the range between 10 and 120 GHz


Multi-Gigabit Fiberoptical ICs

20 Gbps transimpedance amplifier with DC cancelation

6 V differential 40 Gbps MZM driver

VCSEL driver up to 40 Gbps

80 Gbps decision feedback equalizer for fiberoptic communications

 

Impulse Radio UWB Transceiver and Components

UWB single-chip transceiver compliant to standard IEEE 802.15.4a

Impulse UWB RF transceiver with localization capability

UWB RF components between 6.0 and 8.5 GHz

 

Space Application Circuits

8 – 12 GHz delta sigma fractional-N Synthesizer

Programmable integer-N / fractional-N frequency divider

Digital

Crypto Cores

IP cores for flexible AES, ECC, MD5 and SHA-1crypto processors

 

Interfaces

Cardbus, GPIO, I2C slave, SPI master, SPI slave, VGA monitor, UART, 16-bit timer

 

Communication Cores

60 GHz MAC processor

60 GHz OFDM baseband processor

LDPC Co/Decoder

RS Co/Decoder

R-UWB (IEEE802.15.4a) baseband and front-end

Viterbi decoder

FFT

WLAN (IEEE 802.11a) baseband processor and MAC processor

 

Sensor Nodes

16-bit Crypto-microcontroller, also with 64K internal Flash (TNode)

32-bit Crypto-microcontroller (Trusted Sensor Node)

UWB Node

 

Consultancy

MAC protocol design & Gigabit WLAN systems

Wireless sensor networks and applications

Fault tolerant design for space and automotive